Chrisball Posted October 29, 2013 Report Share Posted October 29, 2013 A long shot really just wondering if any of the machining/engineer types would be kind enough to have a look/lend a tap and die of M22 x 1.25 pitch. I need to clean the stem and locknuts up on the RGV500 and im struggling to find any for reaonable money to only do this one off job. Would be happy to pay a deposit and postage plus beer tokens. Any help would be much appreciated. Cheers Link to comment Share on other sites More sharing options...
Jenny Pryde Posted October 29, 2013 Report Share Posted October 29, 2013 I thought this was a Roy Castle thread. Link to comment Share on other sites More sharing options...
phildawson8270 Posted October 29, 2013 Report Share Posted October 29, 2013 http://www.ebay.co.uk/itm/M22-x-1-25-ATS-Circular-Die-Metric-Right-Round-/271291678122?pt=LH_DefaultDomain_3&hash=item3f2a3e7daa Link to comment Share on other sites More sharing options...
kanerdog1x1 Posted October 29, 2013 Report Share Posted October 29, 2013 m22x1.5 yes, but not 1.25. Link to comment Share on other sites More sharing options...
kaighn80 Posted October 30, 2013 Report Share Posted October 30, 2013 As above, check the thread pitch again it seems a bit odd ball Link to comment Share on other sites More sharing options...
Chrisball Posted October 30, 2013 Author Report Share Posted October 30, 2013 As said 1.25 pitch Link to comment Share on other sites More sharing options...
lorenzo Posted October 31, 2013 Report Share Posted October 31, 2013 The link was to a 1.25, but the auction's finished and he's only got 1.5 up there. I'd mail him, see if he has another. Link to comment Share on other sites More sharing options...
Chrisball Posted October 31, 2013 Author Report Share Posted October 31, 2013 The link was to a 1.25, but the auction's finished and he's only got 1.5 up there. I'd mail him, see if he has another. I bought the die mate. Managed to borrow a tap from a kind member on another forum! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.