jollygiant Posted December 26, 2012 Report Share Posted December 26, 2012 I have a 54 plate Tuono Factory and want to adjust the rear ride height as the steering isn't as quick as I want! I have turned the rear ride height on the bottom of the shock so it's 5 out of the 7 turn out.(Undo the blue nut and turn the bottom shock mount out) Has anybody else done this if so by how much, and how much quicker was the steering?? I am used to very quick steering bikes and felt this a little slow for me! Link to comment Share on other sites More sharing options...
GC6269 Posted December 26, 2012 Report Share Posted December 26, 2012 Have you got four rings showing on the fork legs? Link to comment Share on other sites More sharing options...
jollygiant Posted December 26, 2012 Author Report Share Posted December 26, 2012 Yup all 4 and a 180/55. I'm used to my super quick steering of my TDM and want to get that kind of speed of turn in and flick ability into the Tuono? Link to comment Share on other sites More sharing options...
jollygiant Posted December 26, 2012 Author Report Share Posted December 26, 2012 Ooh thanks. Link to comment Share on other sites More sharing options...
GC6269 Posted December 26, 2012 Report Share Posted December 26, 2012 Your TDM steers faster than the Tuono? That surprises me. No disrespect intended. Link to comment Share on other sites More sharing options...
jollygiant Posted December 26, 2012 Author Report Share Posted December 26, 2012 It does have a Thunder Ace front end in and is 3inch lower at the front than standard and 2 inch off the wheelbase, with a Hagon rear shock which is also 15mm longer than standard to! Hence why is corners so well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.