Hendo Posted June 18, 2011 Report Share Posted June 18, 2011 Ayup, Does anyone know what the torque values are for - Top triple clamp to fork leg Bottom triple clamp to fork leg Handlebar to forkleg For a 2000, 5JJ R1. Thankinyaw Link to comment Share on other sites More sharing options...
Evilchicken0 Posted June 20, 2011 Report Share Posted June 20, 2011 I remeber reading in PB that the first 2 are quite low ... it's almost an interferance fit. why not look for a workshop manual online there's bound to be one knocking around. Link to comment Share on other sites More sharing options...
plob Posted June 20, 2011 Report Share Posted June 20, 2011 This is the 5PW, don't know if any use... Link to comment Share on other sites More sharing options...
Hendo Posted June 20, 2011 Author Report Share Posted June 20, 2011 Cheers guys. The bike manual doesnt state the torque settings for 'non periodic maintenace' stuff. It deems the front forks should only be touched by dealers etc. Anyhoo, got it sorted after much, much googling, and the figures are the same as plobs. Im going to look into getting a proper workshop factory manual for it. Cheers again. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.